1-gang universal dimming actuator with two inputs for installation in a size 60 switch box.
Floating contacts can be connected to the two inputs.
The inputs have already been assigned to the actuator at the factory, enabling operation without programming.
Connection to 230 V via a flexible cable, approx. 20 cm long. The inputs and the KNX are connected via a 6-core, approx. 30 cm long, connecting cable. The connecting cable for the inputs can be extended to a max. of 5 m.
KNX software functions: Dimming actuator function:
Switching and dimming lamps. Switch on and dimming behaviour can be adjusted. Feedback of the switching state and the brightness value. “Soft ON”, “Soft OFF” and time dimmer. Dimming
or jumping to brightness values. Time-delayed switch off when a switch off brightness is not reached. Short circuit and load failure signal. Scene operation. Blocked operation via an object with parameterisable brightness value at the beginning and the end of blocking. Behaviour of the dimming actuator after bus voltage recovery.
Free assignment of the switching, dimming, blind and valuator functions. Locking object.
Behaviour when bus voltage recovers.
Switching: two switch objects per input. Command on rising/falling edge (ON, OFF, TOGGLE, no reaction).
Dimming: Single surface and dual-surface operation. Time between dimming and switching and dim step values. Telegram repetition and send stop telegram.
Blinds: Command on rising edge (none, UP, DOWN, TOGGLE), Operation concept (Step – Move – Step or Move – Step). Time between short and long operation. Slat adjustment time. Valuator and Scene ext. input: Edge (push-button as make contact, push-button as break contact, switch) and value on edge. Value adjustment via long push-button action for valuator.
Scene ext. unit with memory function.
Nominal voltage: AC 230 V, 50/60 Hz
Ohmic load: AC 230 V, 50 to 210 W
Incandescent lamps: AC 230 V, 50 to 210 W
Halogen lamps: AC 230 V, 50 to 210 W
LV halogen lamps: 50 to 210 W/VA, wound transformer
50 to 210 W, electronic transformers
Type of protection: IP 20
Dimensions: 53x53x28 (WxHxD)
Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum gap of 4mm between the 230V connection and the connection for the KNX/Inputs (SELV)