Blind actuator REG-K/8x/10 with manual mode

Blind actuator REG-K/8x/10 with manual mode

261.87

SKU: MTN649808 Category:

Description

For independent control of 8 blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be operated manually using push-buttons.
Channel status display via LEDs. A green LED indicates readiness for operation.
With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.
KNX software functions: Blind functions: Blind type. Running time. Idle time. Step interval.
Differentiated disable functions and weather alarms. 8-bit positioning for height and slat.
Scenes. Manual/automatic mode. Differentiated status and status feedback functions.
For each blind output:
Nominal voltage: AC 230 V, 50 – 60 Hz
Nominal current:10 A, cosϕ = 0.6
Motor load: AC 230 V, max. 1000 W
External auxiliary voltage (optional): AC 110-240 V, 50-60 Hz, max. 2 VA
Device width: 8 modules = approx. 144 mm
Contents: With bus connecting terminal and cable cover.

Shopping Cart
-
+
Subtotal
117.37
Total
117.37
Continue Shopping
1