KNX Switch Actuator Basic REG-K/12x/16 A with manual mode

KNX Switch Actuator Basic REG-K/12x/16 A with manual mode

182.07

SKU: MTN6700-0012 Category:

Description

For independent switching of 12 loads via make contacts. All switch outputs can be operated with manual switches. With integrated bus coupler.
A green LED indicates readiness for operation after the application has been loaded.
For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.
KNX software functions: Staircase lighting function with/without manual OFF function, cutout warning for staircase lighting function, logic operation, status feedback per channel, central function, parameterisation for bus voltage failure and recovery.
Rated voltage (nominal voltage): AC 100-240 V, 50-60 Hz
Tolerance range: min. AC 90 V – max. AC 265 V
For each switching contact:
Nominal current: 16 A, inductive load cosφ = 0,6
Nominal load
Incandescent lamps: AC 100 V, max. 1600 W
AC 230 V, max. 3600 W
AC 240 V, max. 3840 W
Halogen lamps: AC 100 V, max. 1080 W
AC 230 V, max. 2500 W
AC 240 V, max. 2500 W
Fluorescent lamps: AC 100 V, max. 900 VA
AC 230 V, max. 2000 VA
AC 240 V, max. 2000 VA
parallel-compensated
Capacitive load: AC 230 V, 16 A, max. 105 μF
Device width: 12 modules = approx. 216 mm
Contents: With bus connecting terminal and cable cover.

Shopping Cart
There are no products in the cart!
Continue Shopping
0